Climbing Technology Thunder - Hammer with Lanyard

Tool Bag for Working at Height The Petzl Toolbag is a versatile tool bag for storing small tools and fasteners when working on the ground and at height. The easy-to-use opening and closing system can be operated with just one hand, allowing quick access to tools at any time. The bag can be attached to a harness using the INTERFAST accessory for a particularly compact and convenient way, or alternatively, with a conventional connector. Thanks to its robust TPU construction, the Toolbag is resistant to UV rays, oils, heat, and cold, making it ideal for everyday use.   Features & Benefits  Versatile: suitable for small tools and fasteners  Practical: one-handed opening and closing system with cord stopper  Secure: prevents tools from falling out when working at heights  Robust: resistant to UV rays, oils, heat, and cold  Flexible: multiple attachment options on the belt, including the INTERFAST system for minimal space requirements   Variants  1.5 L: compact volume for fasteners (bolts, screws, nails, etc.)  3 L: medium size for small to medium-sized tools  6 L: large volume with additional hammer holders for extensive equipment   Target Groups & Areas of Application  Height workers and industrial climbers: safe storage of tools at heights  Scaffolders and fitters: quick access to fasteners and small tools  Event technicians: practical storage when working on stage and in the studio Rigging area  Arborist: secure tool bag for use in the tree or on the ground   Technical specifications  Material: TPU tarpaulin  Attachment: with INTERFAST or standard connector  Closure: cord lock

Tool holder with a load capacity of up to 5 kg Robust tool holder for webbing mounting - ideal for organising heavy tools for working at height, rope access and tree care. The Caritool L can be attached and detached with one hand, remains in position and also has an eyelet for securing tools.   Features One-handed operation - tools can be quickly removed and hooked in Fixed position on the harness - no slipping thanks to stable harness holder Additional safety eyelet - e.g. for cord or safety lanyard Protection against snagging - catch with plastic cover Clearly structured upper area - makes it easier to sort and organise equipment   Technical data Dimensions: 11.5 x 5.5 cm Opening width: 1.5 cm Weight: 35 g Working load: maximum 5 kg Material: plastic, metal Attachment: Strap holder   Important note Not suitable for personal safety & only for holding equipment!

Modular tool safety device with quick-change system The interchangeable tool safety device from CLC Work Gear enables secure attachment and quick changing of hand tools in everyday work. Thanks to the three interchangeable tool ends, the safety device can be flexibly adapted to different tools. The combination of a robust carabiner and attachment loop ensures reliable attachment to a belt or tool belt. Ideal for professional applications in working at heights, in trade or in industry, where tools must be secure and readily available at all times.   Features & benefits     Three interchangeable tool ends for maximum flexibility     Loops made of durable fabric tape (approx. 25 cm each)     Two-lock cord stoppers for secure and firm attachment to the tool     HK carabiner for quick and easy tool changes     Robust snap hook for secure attachment to the belt   Practical fastening loop made of fabric tape for belts or tool belts   Typical applications & target groups  Industrial climbers: Securing hand tools when working at height        Height workers & scaffolders: Secure tool attachment to the belt     Event technicians: Quick tool changes during rigging work     Craftsmen & fitters: Order and secure access in everyday work    Industry & service personnel: Secure organization of work tools

The scaffolding ratchet, probably the most important tool for scaffolding and truss construction, here with a wing nut attachment! Our compact and robust ratchet, also known as a ratchet, ratchet wrench or socket wrench, has a wing nut wrench in addition to the nuts in sizes 19 and 22. This can also be used for Camloc fasteners! The wings of the wing nuts should not be wider than 6 mm, however. The pointed end of the ratchet can be used to lift out bolts or to help in different places. Thanks to two nut sizes and the wing nut attachment, you don't have to constantly switch between tools while you work! The ratchet, made of multi-hardened steel, also has a catch hole for securing it to your belt or can be conveniently stowed in a holster. In any case, your ratchet is always at hand while you work! The tool, which fits very well in the hand, has a total length of 31.5 cm and weighs 500 g.   Details including wing nut attachment Nut sizes: 19 and 22 Material: multi-hardened steel Weight: 500 g Length: 31.5 cm Color: black Hole for securing to the belt Ratchet holder and safety lines available as accessories   Attention: The wing nut slots are the decisive advantage of this ratchet. On the other hand, it is also a predetermined breaking point if the ratchet is used with high force on 19 mm nuts. A broken 19 mm nut is therefore unfortunately not covered by the warranty.

Stable, functional, tried and tested The Eventshop scaffolding ratchet impresses with its solid construction, high load capacity and well thought-out features - ideal for daily use on construction sites, for event structures or in the industrial sector! With an integrated reversing lever, spike for aligning components and combined 19 mm/22 mm socket, it covers all common scaffolding applications. Ideal for: Scaffolders, event and stage technicians, industrial climbers, tradesmen and many more!   Technical data Socket size: 19 mm & 22 mm (switchable) Total length: 30.5 cm Functions: Reversible lever, stable mandrel for component alignment Safety: Hole for attaching a tool lanyard   Advantages in use One tool for two spanner sizes - saves space and time Safe handling even when wearing gloves Lanyard-compatible for use when working at height or where there is an increased risk of falling