Die Bandschlinge von Aliens ist eine Sicherheitsschlinge aus Polyamid mit einer phänomenalen Bruchlast von 27 kN, normiert nach EN 354 (Verbindungsmittel) , EN 566 (Sport) und EN 795 B (mobiler Anschlagpunkt) und in Längen bis 3,60 m erhältlich. Durch die verschiedenen Farben werden die Längen codiert und die Basics bleiben immer gleich. Orange / Gelb = 60 cm, Blau = 80 cm, Rot = 120 cm, Schwarz = 150 cm. Ausgestattet mit einer individuellen Seriennummer ist eine Verwaltung und Identifizierung einfach. Eine Lagerdauer von 5 Jahren und eine Nutzungsdauer von 10 Jahren, je nach dem welcher Fall früher eintritt, runden die Leistungsfähigkeit der Bandschlingen ab. Details: ·       Polyamid ·       Breite 25mm ·       27 kN ·       Längen: 30-360 cm

Die Bandschlinge von Aliens ist eine Sicherheitsschlinge aus Polyamid mit einer phänomenalen Bruchlast von 27 kN, normiert nach EN 354 (Verbindungsmittel) , EN 566 (Sport) und EN 795 B (mobiler Anschlagpunkt) und in Längen bis 3,60 m erhältlich. Durch die verschiedenen Farben werden die Längen codiert und die Basics bleiben immer gleich. Orange / Gelb = 60 cm, Blau = 80 cm, Rot = 120 cm, Schwarz = 150 cm. Ausgestattet mit einer individuellen Seriennummer ist eine Verwaltung und Identifizierung einfach. Eine Lagerdauer von 5 Jahren und eine Nutzungsdauer von 10 Jahren, je nach dem welcher Fall früher eintritt, runden die Leistungsfähigkeit der Bandschlingen ab. Details: ·       Polyamid ·       Breite 25mm ·       27 kN ·       Längen: 30-360 cm

Multifunktionales Anschlag- und Verbindungsmittel, das stufenweise in 7 cm Schritten längenverstellbar ist und durch Aufreißen der Nähte ab 5 kN auch fangstoßdämpfend wirkt. Der SnakeANCHOR kann offen angelegt und so beispielsweise als Kambiumschoner mit Rolle oder Karabiner in gewünschter Länge genutzt werden. Der gechokte (gewürgte) Einbau ist ebenso möglich, auch hier mit Längenverstellung. Die einzigartige Kombination von Tunnelring, parallel vernähtem 8 mm Polyamid-Seil und den Segment-Nähten ergibt für die Praxis ein starkes, vielseitig und unkompliziert einsetzbares Produkt. Als unterer Ankerpunkt können Aufstiegsseile fixiert werden. So kann z.B. ein Abseilgerät an jeder beliebigen Stelle für Rettungszwecke zwischengeschaltet werden.   Eigenschaften: - einsetzbar als unterer und oberer Ankerpunkt - stufenweise Längenverstellung in Schritten von 7 cm durch Segment-Nähte - sichern der Position bei würgender Einbauweise mittels Schnappkarabiner - einsetzbar als verstellbarer Kambiumschoner mit Karabiner oder Rollen - sehr gute Abriebfestigkeit mit breiter Auflage durch parallel vernähtes 8 mm Doppelstrang-Polyamid-Seil - sehr hohe Belastbarkeit und Schonung des Seilauges durch ART-Tunnelring - Erhöhung der Sicherheit und Zuglast durch gleichmäßige Verteilung der Last auf den gesamten Ring (Tunnelring)   Länge: 250 cm

Compact energy absorber with triple swivel The Camp Retexo Gyro Rewind is a modern, compact, next-generation energy absorber. Measuring 1.40 m in length, with sewn-in firehooks and the patented Gyro Rewind triple swivel, it offers maximum safety and reliably prevents the textile arms from twisting or tangling during use. Thanks to optimized fall absorption, it is specifically designed for situations with limited fall clearance (< 4 m) and is suitable for horizontal applications on sharp edges (r = 0.5 mm).   Features & Benefits High Safety: Optimized fall absorption with limited extension in the event of a fall and reliable impact force control Patented triple swivel (Gyro rewind): Prevents arm tangling and ensures smooth movement Rotatable textile arms: 1:2:3 elastic ratio for comfortable handling and adjustable reach Compact Design: Particularly lightweight and suitable for work in confined spaces Horizontal Use: Certified for use on sharp edges - includes fall indicator Easy to Maintain: Removable, washable protective cover for a long service life High Load Capacity: Load capacity up to 130 kg, tested according to EN 355   Target Groups and Areas of Application Working at height in construction, industry, or assembly Event and stage equipment requiring compact and reliable energy absorbers Working on roof edges or steel structures, even in horizontal use

The Camp Retexo Rewind Double is a modern Y-shaped energy absorber with elastic arms ranging from 95 to 135 cm and integrated fall protection. It is certified for horizontal use on sharp edges (r> 0.5 mm) and, thanks to its compact design and sophisticated features, offers maximum safety and practicality. With a permissible user weight of up to 130 kg, it is also suitable for demanding applications.   Features and Benefits Elastic lanyards (95-135 cm): Provide greater freedom of movement and reduce the risk of tripping or hanging. Certified for sharp edges: Safe for horizontal use.  Optimized fall absorption: Suitable for limited fall heights (< 4 m) with lanyards up to 150 cm in total length Robust protective cover: Zippered, removable, and washable, including an easily verifiable fall indicator  Digital security: Integrated NFC tracking chip for quick identification and documentation.  Complete equipment: Supplied with an oval carabiner with screw lock (EN 362) and two 60 mm hooks (EN 362) High load capacity: Up to 130 kg with a total lanyard length of 200 cm   Target groups and areas of application Movement at anchor points with lanyards Working on steel structures, roofs, and facades Use in confined fall areas

Robust multi-pulley for heavy loads The Climbing Technology triple pulley is a particularly powerful deflection pulley for professional users in height work, rescue, rigging and technical rope structures. With three ball-bearing pulleys, mobile flanges and an additional attachment point, it enables the construction of pulley systems with a reduction factor of 6 or complex multiple pulley constructions for maximum lifting force.   Advantages High efficiency thanks to ball bearing pulleys – ideal for heavy loads Protruding side protection prevents direct contact between the rope and the ground Additional attachment point for flexible attachment systems Two carabiner attachments in the upper eye for variable attachment solutions   Features Design: triple rope pulley with mobile flanges Max. rope diameter: 13 mm (textile ropes) Roller bearings: Ball bearings for low-friction, efficient running Material: Aluminium alloy Upper attachment point: Holder for two carabiners Additional attachment point: Only suitable for one lanyard Dimensions: 70 x 139 x 78 mm Standards: CE, EN 12278:2007, UIAA   Typical areas of application and target groups Height workers & industrial climbers: Load and personnel transport Rescue services: Fire brigade, mountain rescue, technical assistance Rigging & event technology: Construction of heavy trusses or stage parts

Orbiter Lvon Climbing Technology ist eine 3fache Aluminium-Seilrolle mit beweglichen Seitenteilen für den Bau eines Flaschenzugs. Die Rolle hat eine Bruchlast von 45 kN bei einer WLL von 12 kN. Das Seil kann einen maximalen Durchmesser von 13 mm haben. ·       Ermöglicht das Einfügen zweier Karabiner in die obere Öffnung und besteht aus auf Kugellagern montierten Riemenscheiben; ·       Die mobilen Flansche aus Aluminiumlegierung reichen über die Riemenscheibe hinaus und schützen die Seile vor Verschleiß; ·       Ideal zur Konstruktion von Einholflaschenzügen mit Reduktionsfaktor 6 oder für multiple Seilrollenvorrichtungen, bei denen eine größere Hebekraft erforderlich ist; ·       Zudem besitzt sie einen zusätzlichen Anschlagpunkt, der nur mit einem Verbindungsmittel besetzt werden kann.

The Climbing Technology quickdraw is an ergonomically designed, robust sling for climbing and professional applications. With its 25 mm width and high breaking load, it offers maximum safety when clipping carabiners and setting up belay systems.   Benefits & Features  Ergonomic Design - Ergonomically designed for easy handling and quick carabiner attachment - Optimal handling when climbing or working on a rope  High Durability - Made from durable material for intensive use - 25 mm wide sling reduces abrasion and ensures even load distribution  Standard-compliant - Certified according to CE EN 566:2017, UIAA - Breaking load: 22 kN Flexible length options - Available in 12 cm and 17 cm, suitable for different situations   Target Groups  Climbers and mountaineers  Industrial climbers and rope access workers  Emergency services

The Climbing Technology Forest is a heavy-duty anchor sling specifically designed for tree climbing and work involving bottom entry. Thanks to the integrated aluminum rings, the anchor point can be easily and safely retrieved from the ground after the work is complete.   Features and Functions Robust anchor sling according to EN 795-B Particularly suitable for tree climbers and users with bottom-entry access Two aluminum rings with different diameters for versatile retrieval and attachment options Durable material: Combination of polyamide (PA) and high-strength polyester (PES) Wide webbing (28 mm) for high abrasion resistance   Technical Specifications Material: Polyamide (PA), Polyester (PES) Width: 28 mm Breaking load: 24 kN Certification: EN 795:2012-B Equipped with two aluminum rings (different diameters)   Target Groups and Areas of Application Tree care workers and arborists Users in construction and assembly work Situations where an anchor point must be safely released from the ground after work is completed

Die AZTEK ProSeries™ Pack Gürteltasche für den Aztek Flaschenzug von Rock Exotica mit zwei großen Taschen und Karabiner-Halterung ist eine sinnvolle und schnelle Unterbringung für das zertifizierte Flaschenzugsystem. Die CMC Gürteltasche mit den Maßen von 26 x 18 x 9 cm und einer Gürtellänge von bis zu 130 cm über 100 bietet mit zwei großen geräumigen Haupttaschen sowie einer kleineren Fronttasche nicht nur genügend Platz für das Aztek inkl. Seil, sondern auch vielfache Unterbringungsmöglichkeiten für Material und Werkzeug in der Höhenarbeit und der Veranstaltungstechnik. Neben einer zusätzlichen Schlaufung an der Rückseite der Tasche verfügt sie auch über die Möglichkeit, Karabiner an der Seite anzubringen. Sie organisiert und vereinfacht die Arbeit im Rigging, ist leicht, klein und lässt sich jederzeit mitführen. Wie alle CMC Produkte bei uns im Programm wurde auch dieses extra für uns in den USA gefertigt. Zudem verfügen alle von CMC gerfertigten Produkte auch über ein Namensschild zur Personalisierung. Im Lieferungumfang ist lediglich das Produkt, nicht das zusätzlich Material enthalten.

Die Courant Ellipse Rope Sling Bandschlingen sind aus einem sehr widerstandsfähigen und witterungsbeständigen Aramid & Polyester hergestellt, nach EN 566 und EN 795 normiert und sind hervorragende Hilfsmittel für die Ergänzungen in der Persönlichen Schutzausrüstung. Die Ellipse Bandschlingen sind resistent gegen UV-Strahlung, sehr abriebfest und daher hervorragend für die Selbstsicherung und zum Standbau. Auch als Verlängerungsmittel zwischen Haken und Karabiner eignen sich Ellipse Bandschlingen ideal. Eigenschaften: ·       Bruchlast: 22 kN ·       Durchmesser: 8 mm ·       Normen: EN 566, EN 795

The Courant Ellipse webbing slings are robust slings made of 19 mm wide polyester webbing with a high breaking load of 22 kN. They are available in five lengths, each with its own color for quick identification. Each sling is individually serialized and meets the requirements of EN 795 Type B and EN 566.   Features and Benefits  Five lengths available: 60 cm, 80 cm, 120 cm, 150 cm, 200 cm Color-coding for easy identification of lengths High security: Breaking load 22 kN, individual serial number for traceability Robust material: Polyester webbing, UV-resistant and durable  certifications: EN 566:2017, EN 795 Type B: 2012   Target Groups and Applications Height workers and industrial climbers Rescue workers Arborists and climbers   Technical Specifications Material: Polyester Width: 19 mm  Breaking load: 22 kN  Individual serial number

The Courant Phoenix 10 mm is a robust friction-lock rope with sewn terminations, specifically designed for use as a lanyard for Prusik knots. Its durable aramid fiber sheath makes it particularly heat-resistant, abrasion-resistant, and durable—ideal for professional applications in work at height, rescue, and tree care.   Features and Benefits High safety: sewn rope ends increase stability and reliability Robust materials: Aramid sheath provides heat resistance, UV stability, and protection against abrasion Certified according to EN 795 B: meets international standards for anchor points and lanyards Compact design: 10 mm diameter makes it handy and easy to knot   Target groups and areas of application Height workers and industrial climbers who require a reliable lanyard for Prusik knots Rescue workers who use robust and heat-resistant short belays Arborists who use a durable lanyard for their climbing technique   Technical specifications Diameter: 10 mm Available lengths: 75 cm, 80 cm, 85 cm Breaking load: 30 kN Certification: EN 795 B Material: Aramid (sheath)

Das Courant Phoenix 8mm ist ein Klemmknotenseil mit vernähten Seilenden und einem Durchmesser von 8 mm, das als Lanyard für Prusikknoten eingesetzt werden kann. Es ist nach EN 795 B zertifiziert, hat eine Bruchlast von 22 kN und aus sehr hitzebeständigen und abriebfesten Aramidfasern hergestellt. Details ·       Klemmknotenseil für Kurzsicherungen und Prusikknoten ·       Zertifiziert nach EN 795 B ·       Durchmesser 8 mm ·       Bruchlast: 22 kN ·       stabile Endvernähungen ·       Mantel aus Aramidfasern ·       Hitze, UV-beständig und abriebfest

The Courant Syncro is a robust cambium saver for professional tree care. Thanks to its wide, stiff strap and extremely durable forged aluminum rings, it stays reliably in position and prevents twisting. This minimizes friction on the climbing rope while protecting the tree. As a sling, the Syncro can also be used as a secondary anchor point – a real must-have for tree surgeons and arborists! The Syncro is available in three different lengths and color-coded ends for easy handling.   Features Cambium saver for professional tree care Wide, stiff strap for a secure hold Forged aluminum ring with high abrasion resistance Color-coded ends for better recognition Certification: CE EN 795 B Available lengths: 0.9 m / 1.1 m / 1.3 m Breaking load: 22 kN   Target groups and areas of application Tree surgeons and arborists - protection of rope and tree during rope installation Rope climbing technique (SKT) - reliable anchorage device for working and safety ropes Tree climbers in training - easy handling thanks to stiff strap and color coding Professionals in the field of working at height with trees - also suitable as a secondary anchor.

Lanyard with energy absorber and wrist carabiner Lightweight, compact I-shaped lanyard with an elastic arm and ONE TOUCH II wrist carabiner. Ideal for work on aerial work platforms, rigging, and connecting to a lifeline. The integrated energy absorber is designed for a payload of up to 140 kg and, thanks to edge-tested components, offers high safety even when used horizontally.   Advantages & Features  Edge-tested - according to RFU 11.075 - approved for horizontal applications  Integrated energy absorber - impact force limitation for users weighing 40-140 kg - maximum breakaway length: 160 cm  Easy handling - ONE TOUCH II wrist carabiner for ergonomic clipping and unclipping - elastic band ensures freedom of movement and prevents tripping hazards  Compact & sustainable - made in Germany   Target groups & areas of application  Aerial work platforms and the construction industry - safe self-belaying and intermediate belaying  Rigging and event - handy lanyard for quick transfer  Industrial climbers and height workers - reliable energy absorber with edge testing  Security and rescue teams - for demanding applications with high flexibility   Technical specifications  Design: I-lanyard  Energy absorber length (breakaway length): 160 cm  Payload: 40-140 kg  Minimum breaking strength: 15 kN  Certification: EN 355, RFU 11.075 (edge ​​tested) Material: Polyester, aluminum  Carabiner: ONE TOUCH II wrist carabiner

Mobile anchorage for professional tree care The adjustable cambium saver from Edelrid (125 cm) was specially developed for the requirements of tree care. The pre-assembled Tibor Prusik (8 mm) allows for easy length adjustment. As a mobile anchorage or redirection device for climbing ropes, it offers maximum flexibility and reliable protection for the tree trunk. Color-coded aluminum rings, a two-tone webbing, and the stiffened end facilitate installation and removal from the ground. The set also includes a matching strop and the particularly slim Edelrid Weblink end connectors.   Features and Benefits Adjustable: Easy length adjustment with Tibor Prusik (8 mm) Tree-friendly: Serves as a mobile anchor or redirection for climbing ropes User-friendly: Color-coded aluminum rings and two-tone webbing facilitate installation and removal from the ground Practical: Reinforced end prevents snagging during extraction Complete set: Includes extraction yoke and weblink end connections   Target Groups and Areas of Application Tree care professionals and arborists who require an adjustable, reliable anchor Industrial climbers in the green care sector Professional users who value ease of use and durable materials   Technical Specifications Length: 125 cm Material: Polyester webbing, aluminum rings, 8 mm Tibor Prusik Ring diameter: - Large ring: 40 / 64 mm (inside/outside) - Small ring: 28 / 53 mm (inside/outside) Minimum breaking load: 18 kN Certifications: VE EN 95 B, ANSI Z133, CEN/TS 16415

Edelrid Aramid Cord Sling 6 mm schwarz 30 cm

The Edelrid Cambiumsaver Bicolor, 90 cm long, is a cambium saver specially developed for tree care and serves as a mobile sling or as a deflection for climbing ropes. The Cambiumsaver has two aluminum rings in different colors and a two-tone webbing to make installation and removal from the ground easier. In addition, the 2.5 cm wide webbing prevents the cambium protector from twisting. The Cambiumsaver has a minimum breaking load of 25 kN and is EN 354 and EN 795 Type B certified   Details Length: 90cm Width of webbing: 2.5 cm Diameter of large ring (inside/outside): 40/64 mm Small ring diameter (inside/outside): 28/53 mm Delivered with matching cherry picker Large and small eyelet for ropes with spliced ends Certifications: EN 354, EN 795 Type B

The Edelrid Defuser L energy absorber reduces the impact in the event of a fall and is designed for a maximum payload of 140 kg. Thanks to its narrow and elongated design, the Defuser L allows a greater distance from the safety rope and may only be used in combination with the FUSE fall arrester     Details: May only be used in conjunction with the Edelrid Fuse Certification in combination with FUSE: EN 353-2, EN 12841, ANSI Z359.15 greater distance to the safety rope possible Length: 30.0cm Weight: 76g maximum user weight: 140 kg Country of origin: Germany

Energy absorber for Edelrid FUSE with high rescue load The Edelrid Defuser Rescue is a compact energy absorber used exclusively in combination with the FUSE guided-arrest device. With a high payload of up to 220 kg, it is specifically designed for professional use and rescue scenarios where a second person must be integrated into the belay system.   Advantages & Features High load capacity - For personnel loads up to 220 kg - Ideal for working with heavy equipment or in rescue operations - Offers additional safety reserves in an emergency  Particularly safe - Reduces the impact force to a maximum of 4 kN (30% below the standard limit of 6 kN) - Ensures less stress on the user and equipment Convenient inspection - Integrated viewing window allows for quick checks of the energy absorber's integrity at any time  Compact & robust - Handy design for efficient work - Durable material made of polyester and HMPE   Target groups & areas of application  Rescue workers and firefighters - Safe work when transferring personnel into the system  Industrial climbers and height workers - Reliable fall protection even with additional load  Technical rescue and recovery - High safety reserves in extreme situations  Working with heavy equipment - Additional load-bearing capacity for materials and tools   Technical specifications  Length: 210 mm  Material: Polyester/HMPE  Certifications (with FUSE): EN 12841-A, EN 353-2, ANSI Z359.15 Maximum person load: up to 220 kg Impact force: max. 4 kN  Area of ​​use: For use with Edelrid FUSE only Made in Germany

The Edelrid HMPE Cord Sling is a sewn-in round sling made of high-strength kernmantle material. The HMPE core offers extremely high strength and flexural stability, while the tightly braided polyester sheath is abrasion-resistant and stiffens the sling. This makes it particularly easy to thread through hourglass loops and also creates a reliable clamping effect when used as a Prusik sling. The 30 cm version is ideal for use as a compact Prusik sling, while longer versions offer versatile securing options.   Advantages for Users  Very high strength and permanent bending stability thanks to the HMPE core Abrasion-resistant polyester sheath for a long service life Particularly stiff braiding, ideal for threading hourglasses Good clamping effect when used as a Prusik sling   Target Groups and Areas of Application  Height workers and industrial climbers: for short belays, Prusik slings, and redundant anchor points  Mountaineers and alpinists: for threading hourglasses and belay station construction  Rescue workers: as a robust, compact sling for versatile belaying situations   Technical Specifications Material: HMPE core, polyester sheath Diameter: 6 mm  Available lengths: 30 cm, 90 cm Minimum breaking strength: 22 kN Certifications: EN 354, EN 566 Made in Germany, Fair Wear

Edelrid KAA Pulley System The Edelrid KAA is a prefabricated pulley system for professional users in rescue, work at height, and work positioning. Thanks to its compact, strap-based design, it is one of the lightest and most space-saving solutions on the market. It is ready for immediate use, saving valuable time in an emergency.   Features and Functions Versatile: Lifting of personnel in rescue situations, guying, work positioning, restraint system (open/closed), and controlled lowering Compact Design: Strap-based pulley system - particularly light, small, and easy to transport Efficient Power Transmission: Depending on the configuration, a 4:1 or 5:1 lifting ratio, with an efficiency of 91% Safe Handling: Hand lever on the pulley allows for optimized pulling and controlled lowering. Swivel joints at both ends: Prevent the system from twisting during use. Ready for immediate use: Delivered pre-assembled and ready to use, requiring no additional assembly. Integrated RFID chip: For easy material management and digital documentation   Areas of application Rescue operations (e.g., rescuing people from heights or depths) Workstation positioning at height Restraint systems in open or closed configurations Guying systems Technical rescue & work at height Event and stage technology   Technical specifications Lengths: 0.8 m or 1.5 m Minimum breaking force: 22 kN Efficiency: 91% Lifting ratio: 4:1 or 5:1 (depending on positioning) Certification: EN 354 Special features: Integrated RFID chip, Fair Wear, Made in Germany

Flexible Anchoring Solution for Variable Application Scenarios The Edelrid Match Sling is a multifunctional, length-adjustable lanyard for professional applications in working at height, rescue, and rope access. Thanks to its stepless length adjustment, it is ideally suited as an anchor point for various sized anchor points, as well as for precise redirects and intermediate anchors. Its compact design and light weight also allow it to be used as an alternative stretcher suspension system. In emergency situations, such as pick-off rescues, the Match Sling can also be used as an auxiliary pulley system.   Features & Benefits · Length-adjustable lanyard: Infinitely adjustable for maximum flexibility at the anchor point · Versatile use: Suitable as a lanyard, redirect, intermediate anchor, or carrying sling · Stainless steel eyelets: High durability and reliable power transmission · Slide block buckle: Simple, precise adjustment even under load · Lightweight & compact: Ideal for mobile applications and space-saving transport · High safety: Minimum breaking strength of 22 kN   Target groups & applications · Industrial climbers and rope access technicians - Attaching to variable structures, setting up redirects and temporary anchor points · Rescue teams and technical response teams - Use as a lanyard, anchor aid, or auxiliary pulley system in pick-off rescue scenarios · Rope access technicians and event technology - Flexible intermediate anchors and clean rope management for temporary installations   Technical details · Certifications: EN 354, EN 566, EN 795 B Material: Polyester Band width: 20 mm tubular webbing Available lengths (infinitely adjustable): 110 cm, 150 cm, 200 cm Buckle: Slide block buckle Stainless steel eyelets

Energy absorber with large aluminum hooks The Edelrid Shockstop Y 140 Giant is a robust Y-shaped lanyard with 130 cm elastic arms, an integrated energy absorber, and extra-large aluminum tubular hook carabiners. It was specially developed for safe use when working at height and is particularly suitable for scaffolding, moving around anchor points, or passing lifelines and intermediate anchors. Approved according to RFU 11.075, the energy absorber is also suitable for horizontal applications on edges.   Features and Benefits Elastic Y-arms (130 cm): Provide freedom of movement and reduce the risk of tripping  High load capacity: Approved for a user weight of 60 to 140 kg Edge-tested according to RFU 11.075: Safe use in horizontal applications on sharp edges Large aluminum hooks: Tubular hooks with a 64 mm opening width, ideal for massive structures! integrated swivel carabiner: Prevents twisting of the lanyard arms at the harness connection Reliable fall absorption: Minimizes impact force and fall stress Made in Germany & Fair Wear: Sustainably manufactured with tested quality   Target groups and areas of application Height workers & industrial climbers (large structures, trusses) Scaffolders (working on pipes, frames, beams) Frequent passage through intermediate anchors

Die schwarze, breite Rundschlinge von Edelweiß mit einer Breite von 26 mm und einer Bruchlast von 22 kN ist aus besonders griffigem Nylonmaterial gefertigt und eignet sich für alle Arten der Sicherung und Positionierung in der Höhenarbeit. Normiert ist sie nach EN 795 B und EN 566 sowie EN 354 und damit ein Allroundtalent, das zusätzlich individuell nummeriert ist. Verfügbar ist sie in den Längen 60 cm, 80 cm, 120 cm und 150 cm.

Compact pulley system for precise lifting and positioning The Harken Wingman pulley sets new standards for the performance of compact, personal pulley systems thanks to its innovative design. As one of the first systems in its class, the Wingman features an internal mechanical rope guide, eliminating the need for external Prusik loops. The combination of a ratchet pulley for precise rope stopping and a composite handle allows the user to open and close the system even under load, ensuring fine-tuned, controlled release. Even at maximum load and with the pulleys fully retracted, full control is maintained when releasing the system—one hand on the handle, the other on the rope.   Features & Functionality  Internal ratchet mechanism: Replaces external Prusik loops for sleeker, more reliable operation (Eccentric advance capture)  Controlled release under load: The ergonomic composite handle allows precise opening and closing of the system, even under maximum working load  High-efficiency ball bearing pulleys: Maximize efficiency when lifting and lowering loads up to 309 kg Compact design: Minimal overall length of only 20 cm (8 inches) for more clearance and greater throwing distance, maximum length: 3 m     Robust construction: Machined aluminum pivot points and pulleys designed for maximum rope strength.   Target groups & areas of application Technical rescue: Use in confined spaces, such as under tripods, where maximum lifting height is required.  Industrial climbers / rope access: Creation of adjustable directions and precise positioning of work points Special forces / tactical teams: Lightweight and compact system for mobile, tactical operations with limited space

The Kong Aro Bull round sling is a robust sling made of durable polyamide, specially designed for heavy loads. With a minimum breaking load of 35 kN, it offers a high level of safety and reliability in professional applications. An integrated abrasion indicator provides additional safety: When the sling becomes worn, a different colored band appears, immediately signaling the user when it's time to discard it.   Benefits for Users High load capacity thanks to a 35 kN breaking load Abrasion indicator for increased safety during use Versatile use as an anchor point or lanyard   Target Groups and Areas of Application Industrial climbers and height workers: as a safe anchor point and lanyard Rescue workers: for anchor points during rescue operations and redirection points Construction and scaffolding: for reliable load support Event and stage equipment: discreet application in black for unobtrusive installations   Technical Data Material: Polyamide Minimum breaking load: 35 kN Certifications: CE EN 354, EN 795 B, EAC, ANSI Z359.18

Kong Prog 50 cm - Clip aid with FROG carabiner   Reliable clip aid for sport and industrial climbing: The Kong Prog combines a stiffened sling with the patented FROG carabiner, which closes automatically upon contact with the anchor point. Ideal for clipping hard-to-reach points at a distance – whether at the start of climbing tours, during high-altitude rescue or for positioning.   Length: 50 cm Colour: Black Carabiner: FROG, self-closing, EN 12275 & EN 362 certified Material: Polyamide, aluminium Weight: approx. 125 g Not releasable under load

Individually adaptable set for a Y-energy absorber combination   With this modularly adaptable set for a Y-energy absorber combination, you are well equipped! It combines high-quality individual components and offers maximum flexibility: The Petzl Absorbica energy absorber is connected to the Petzl Ring Open, to which two Jane I 60 cm lanyards, two 8 mm chain emergency links and two pipe hooks are attached.   The advantages at a glance Flexibility: Compared to permanently sewn sets, the individual components can be replaced if necessary. Maximum safety: Thanks to the Y-arms, movement remains smooth and the permissible total length is maintained. Versatility: The individual components greatly expand the possible uses - also ideal for SQQ2 Level 1 training courses where sewn-in hooks are less useful. The set can therefore easily be retrofitted with smaller hooks if necessary! Easy to attach: Like all other energy absorbers, the set is attached to the sternal or dorsal eyelet of the harness with an oval carabiner.   Certifications Petzl Absorbica : EN 355 Petzl Jane I : EN 354, EN 795 Petzl Ring Open: EN 362 Maillon Rapide 8 mm emergency chain link : EN 362, EN 12275 Aliens Large Snap Hook: EN 362   Note: The set is not delivered assembled!

Modular energy absorber for lanyards The Petzl ABSORBICA is a compact, modular fall arrest energy absorber. It can be flexibly combined with JANE I or JANE Y lanyards, providing customized solutions for various work and rescue scenarios.   Advantages & Features  Modular system: - Combination with JANE I or JANE Y for lanyards up to 2 m in length - Individual components (e.g., RING OPEN, MICRO SWIVEL) are easily replaceable and adjustable  High safety: - Progressive tearing of the webbing reduces the impact force in the event of a fall - Suitable for users weighing 60-140 kg Compact design: - Does not hinder movement - Space-saving when carried on the harness  Robust protective cover: - Protects against abrasion and splashes - Simplified opening system for quick and regular inspection  Flexible attachment options: - Frequent attachment/detachment: with carabiner + STRING or MICRO SWIVEL - Quasi-permanent attachment: with RING OPEN or SWIVEL OPEN for optimal positioning   Target groups and areas of application  Height workers & industrial climbers: Individually configurable Energy absorber system  Construction and steel assembly: flexibly adaptable to changing work environments  Event and stage equipment: safe and space-saving in tight spaces   Technical specifications  Maximum system length: up to 2 m (with JANE lanyard)  Material: Polyester, polyamide  Certification: CE EN 355

Double lanyard with integrated energy absorber for work at height and rescue The Petzl Absorbica Y 150 without a pipe hook is a compact lanyard for safe use on vertical structures, horizontal lifelines, and for passing intermediate anchors. The integrated energy absorber reduces the impact force by progressively tearing the webbing, while elastic arms and the compact design allow for full freedom of movement. A durable protective cover protects against abrasion and allows for quick visual inspection.   Features and Benefits  Compact and space-saving: Very small energy absorber for unrestricted freedom of movement  Progressive energy absorber: Significantly reduces the impact force in the event of a fall  Elastic arms: Ensure comfortable handling while climbing and working  Robust protective cover: Protects the energy absorber from abrasion and allows for regular inspection  Flexible attachment options: - With carabiner + STRING element for frequent connection/disconnection - With RING OPEN for a quasi-permanent connection  High compatibility: Can be used with carabiners or MGO OPEN connectors  Optimized for user weights of 60-140 kg   Target Groups and Areas of Application  Height workers and industrial climbers  Construction and assembly work on steel and concrete structures Work on lifelines, horizontal and vertical safety systems  Rigging, event technology, and technical rescue   Technical Specifications  Certifications: - CE EN 355 (RFU PPE-R/11.074) - ANSI Z359.13, 12 ft. FF - CSA Z259.11-17 - Japanese Fall Protection Regulation - GB/T 24538: Type II  Maximum length including connectors: - 200 cm (EN 355, GB/T, JP) - 183 cm / 6 ft (ANSI, CSA)  Materials: Polyester, polyamide  Weight range: 60-140 kg (CSA: 75-140 kg)

Double lanyard with energy absorber The Petzl ABOSRBICA Y is a double lanyard with an integrated energy absorber for safe movement on vertical structures or horizontal lifelines. Its compact design offers maximum safety while maintaining maximum freedom of movement.   Advantages & Features  High safety in the event of a fall: progressive tearing of the webbing effectively reduces the impact force  Wide weight range: suitable for users from 60 to 140 kg  Compact design: does not hinder movement  Protective cover with inspection opening: protects the energy absorber from abrasion and splashes, facilitating regular inspection Flexible attachment: optionally via carabiner (STRING element included) or permanently with RING OPEN  Variable combinations: ends can be equipped with carabiners or MGO OPEN connectors   Target Groups & Areas of Application  Height workers and industrial climbers: safe movement and transfer to intermediate anchors  Scaffolders and steelworkers: reliable protection when working on vertical structures Event technicians: safe use on handrail ropes or structures  Rescue workers: as part of personal fall protection   Technical Specifications  Lanyard length: 80 cm (max. 100 cm including connectors)  Material: Polyester, polyamide Certification: CE EN 355  User weight range: 60-140 kg

Double lanyard with energy absorber and intermediate rings The ABSORBICA Y TIE-BACK is a double lanyard with an integrated energy absorber, elastic arms, and intermediate rings for redirection. These allow attachment to very wide poles and expand the application possibilities for work at height and rescue.   Advantages & Features Maximum flexibility: Tie-back extension rings allow secure attachment to wide structures  High safety in the event of a fall: progressive release of the energy absorber reduces the impact force  Suitable for users weighing 60-140 kg: wide range of applications for professional use  Compact design: elastic arms ensure freedom of movement and prevent tripping  Robust protective cover: resistant to abrasion and splashes, easy opening system for quick inspection  Delivered ready for use: - Two MGO connectors (large gate opening for metal structures) - One Bm'D connector for attaching to the harness   Target Groups & Areas of Application  Height workers and industrial climbers: secure attachment even to wide structures  Steel and scaffolding erectors: ideal for large-volume structures or rods  Event and stage technicians: flexible attachment to wide trusses and stage constructions   Technical Specifications Specifications Total length (including connectors): 183 cm Material: Polyester, polyamide, high-density polyethylene, aluminum  Certifications: - CE EN 355 (RFU PPE-R/11.074) - ANSI Z359.13, 12 ft. FF - CSA Z259.11-17 (75-140 kg) - Japanese Fall Protection Regulation - GB/T 24538: Type II

Simple lanyard with compact energy absorber The ABSORBICA-I 150 is a lanyard with an integrated energy absorber for safe movement on horizontal lifelines (textile or wire rope) or on lifting platforms without passing through intermediate anchors.   Features & Properties  Compact design for unrestricted freedom of movement  Progressive energy absorber reduces the impact force  Suitable for users weighing 60-140 kg (CSA: 75-140 kg)  Cover protects the energy absorber from abrasion and dirt, with an opening system for easy inspection  Elastic webbing to minimize interference during movement  Two attachment options on the harness - Frequent hooking/unhooking with a carabiner + STRING element - Quasi-permanent hooking with a RING OPEN eyelet  Compatible with various connectors   Target Groups  Height workers and industrial climbers  Specialists in construction and steel assembly Users on work platforms and aerial platforms  Use in event technology and rigging  Security personnel and rescue workers   Technical Specifications  Maximum length including connectors - 200 cm (EN) 355, GB/T, Japanese regulation - 183 cm/ 6 ft (ANSI Z359.13, CSA Z259.11-17)  Material: Polyester, Polyamide  Standards & Certifications: - CE EN 355 /RFU PPE-R/11.074) - ANSI Z359.13 (12 ft. FF) - CSA Z259.11-17 - GB/T 24538-2009: Type II - Japanese regulation for protection against falls from a height

The Petzl Absorbica-I 80 lanyard with the new, even more compact 14 cm short energy absorber is designed for movement on a horizontal railing rope (textile or wire rope) or on a lifting platform without passing through intermediate safety devices. The energy absorber, certified according to EN 355, is suitable for users whose body weight is between 60 and 140 kg. The energy absorber can be carried on the belt to save space and is located in a cover that can be accessed quickly thanks to the simplified opening system. This protects the energy absorber from abrasion and can be checked regularly. Due to its compactness, the energy absorber does not hinder the person using it while moving and does not hinder work. In the event of a fall, the shock exerted on the person using it is reduced by the progressive tearing of the energy absorber's webbing.   The maximum permitted length with connecting elements is 100 cm. Depending on the use, there are two options for attaching the energy absorber to the harness: With the help of the supplied STRING element, a carabiner can be held in the correct position and enables frequent clipping and unclipping. A screw-on RING OPEN eyelet, whose round shape ensures optimal positioning, can be used for a quasi-permanent connection. The end of the lanyard can be fitted with either a carabiner or an MGO Open lanyard with a large snap opening.     Details Material: Polyester, Polyamide Certification: EN 355 Weight: 0.170kg maximum permitted length with connecting elements: 100 cm Durable fabric cover protects against abrasion Reduction of impact in the event of a fall by progressively tearing the webbing suitable for users with a body weight between 60 kg and 140 kg multiple attachment options on the harness